Question: I would like to know is the Read only SNMP string is able to retrieve/read the full config? I got vendor request for SNMP read-only string, i wonder if they can read running-config of my WS-C3560X-24T-L by pulling with read-only right, they...
The definition of Private VLAN is: Virtual LAN (VLAN) is a mechanism to divide a broadcast domain into several logical broadcast domains. Private VLAN is an extension to the VLAN standard, already available in several (most recent) physical switches....
As you know, OSPF goes through the following process to select the best (candidate) routes: Run intra-area SPF for every area to which the router is connected; Run inter-area and external route selection process (actually a distance-vector calculation,...
Question: The rules for assigning the OSPF router-id to a router or a 3-layer switch like WS-C3560X-24T-L (if no router-id is configured manually, the highest ip of the loopback interfaces is used. If no loopback interfaces then the highest ip of physical...
Question: so i have 3 switches. switch A connected to switch B and B connected to C. Switch A is a vtp server vtp version 2 Switch B is a VTP Transpernt mode Version 2 Switch C is a VTP Client mode version 2 all connections are trunking no pruning involved,...
What does this feature do? This feature is used to enable an interface-local proxying of ARP requests. Activation will make the router answer all ARP requests on configured subnet, even for clients that shouldn't normally need routing. Uses This is primarily...
Question: I am following same topology as mentioned in the INE labs. Initially I had all WS-C3560X-24T-L switches configured as a SERVER. Everything was working fine in terms of VLAN updates through out the topology. I am getting following issue after...
The Cisco DHCP server feature is a full implementation that assigns and manages IP addresses from specified address pools to DHCP clients. After a DHCP client has booted, the client begins sending packets to its default router. The IP address of the default...
Question: 1. can switch WS-C3560X-24T-L read an IP address or can they understand IP address? I connected 3 PCs with different subnet mask to switch ports and they were not able to talk to each other, but when they are in the same network, they can communicate....
Question: I'm a bit confused about a detail in the switch adresses learning process: Switch WS-C2960S-24TS-L has an empty bridging table. Has 2 PC's connected PC1 sends a PING to PC2 (so A learns PC1 MAC) As switch A doesn't know PS2, it floods the packet....
